H-NAVInew tipping box!
CH 1 AXLE
CHARACTERISTICS
● Galvanized tanker
● Internal anti-sway bulkheads (standard for ≥ CH 5000)
● Rear manhole
● Two suction hoses with quick coupling system
● Sprung Drawbar (standard ≥ CH 8000 ES)
● Hydraulic support leg (standard ≥ CH 8000 ES)
● Rear exact spreader plate
● Level gauge (tubular)
● Configurable wheels and axles
● Rear hydraulic valve single effect until CH 7000
(double effect from CH 8000 ES on)
● Manual valve
● Pre-preparation for spreading booms mounting
(standard for ≥ CH 8000 ES)
● LED lights (standard ≥ CH 8000 ES)
● Safety device, lighting and signaling in accordance with current legislation
Standard Product
| Characteristics | Uni | CH 3000 | CH 4000 | CH 5000 | CH 6000 | CH 7000 | CH 8000 ES |
| Indicative empty weight | t | 1,20 | 1,40 | 1,7 | 1,9 | 2,4 | 3 |
| Total Technical Mass | t | 5,47 | 6,87 | 7,50 | 9,00 | 11,00 | 14,50 |
| M.M.T.A. on axle(s) (≤40 Km/h) | t | 3,97 | 5,37 | 6,00 | 6,00 | 8,00 | 11,50 |
| M.M.T.A. at coupling point | t | 1,50 | 1,50 | 1,50 | 3,00 | 3,00 | 3,00 |
| Capacity | l | 3 100 | 3 900 | 5 100 | 6 100 | 7 000 | 8 400 |
| Chassis Type | - | About chassis | Self-supporting | Self-supporting | Self-supporting | Self-supporting | Self-supporting |
| Dimensions | |||||||
| Tank Length/Diameter | m | 2,70×1,26 | 3,30×1,26 | 3,30×1,44 | 3,92×1,44 | 3,65×1,60 | 4,46×1,60 |
| Rear manhole diameter | mm | 1 260 | 1 260 | 1 437 | 1 437 | 950 | 950 |
| Diameter - outlet valves, hoses and accessories | mm / '' | 127/5 | 127/5 | 150/6 | 150/6 | 150/6 | 150/6 |
| Total length | m | 4,52 | 5,35 | 5,33 | 6,02 | 6,15 | 7,15 |
| Total width | m | 1,80 | 1,82 | 2,02 | 2,24 | 2,31 | 2,50 |
| Total height | m | 2,04 | 2,05 | 2,22 | 2,24 | 2,58 | 2,71 |
| Level gauge diameter | mm | 50 | 50 | 50 | 50 | 50 | 50 |
| Suspension, axles and tyres | |||||||
| Axle Type | - | 1 Fixed Axle | 1 Fixed Axle | 1 Fixed Axle | 1 Fixed Axle | 1 Fixed Axle | 1 Fixed Axle |
| Axle square - (number of studs) | mm - (no.) | 60 - (6) | 70 - (6) | 70 - (6) | 80 - (6) | 100 - (8) | 100 - (10) |
| Braking hubs | mm | 300 x 60 | 300 x 60 | 300 x 60 | 300 x 60 | 400 x 80 | 406 x 120 |
| Axle track | mm | 1500 | 1500 | 1600 | 1750 | 1900 | 1950 |
| Wheels | - | 11.5/80-15.3 14PR | 400/60-15.5 16PR | 400/60-15.5 16PR | 435/50 R19.5 | 385/65 R22.5 | 560/60 R22.5 |
| Standard Equipment | |||||||
| Pump | - | MEC 3000 | MEC 5000 | MEC 5000 | MEC 6500 | MEC 8000 | MEC 8000 |
| Length suction tubes | m | 2 x 3,0 | 2 x 3,3 | 2 x 3,3 | 2 x 3,3 | 2 x 3,3 | 2 x 3,3 |
| Preparation for hydraulic side arm | - | - | - | - | - | - | Yes |
| Support leg | - | Mechanic | Mechanic | Mechanic | Mechanic | Mechanic | Hydraulic folding |
| N.º of anty-sway bulkheads | - | - | - | 2 | 2 | 2 | 2 |
| PTO Shaft | - | Fuse | Fuse | Fuse | Fuse | Fuse | Fuse |
Optional
Drawbar with hydropneumatic suspension
It ensures greater stability and comfort of the tank in operation and allows the height of the hydraulic boom to be adjusted.
Independent hydraulic suspension
A wider working range and in a controlled way guarantees more stability, safety, and is adjustable.
Lift 1 axle
Essential for saving resources such as tires and fuel. Only available for hydraulic suspension.
Hydraulic side arm M, L and XL
For automatic filling, directly from the well.
2 and 3 joint upper arm
It facilitates the filling of wells or tanks that are difficult to access, whether underground or elevated.
Internal agitator
Recommended when transporting denser slurries to allow for more even distribution.
Complete emptying system
For complete emptying of the slurry tanker, regardless of the slope of the terrain.
Load transfer system
It favors the stability of the tank during spreading, improves traction on slopes, until the tank is completely empty.
Top Funnel
Funnel increasingly used in slurry tankers for slurry drainage purposes.
Chisel-type anchor locators with injectors
It allows slurry to be applied at a depth of approximately 20 cm, helping to improve nutrient utilization.
Hydraulic Locators
Suspension application, ensuring uniform distribution.
Stone Trap
Used to store rocks or heavy debris.
3-position manual and electric valve
It allows you to change the braking capacity, according to the weight of the load.
Automatic centralized lubrication
Automatic lubrication of the critical points of the equipment, it is only necessary to put grease in the reservoir.
Green Precision Basic, Pro and Plus
Slurry control and monitoring system.
May include:
1. Conductivimeter
2.Tablet/Mobile phone with Android App
3. GPS/Bluetooth receiver
4. Automatic Adufa
5. Storage of the collected data in the cloud
May include:
1. Conductivimeter
2.Tablet/Mobile phone with Android App
3. GPS/Bluetooth receiver
4. Automatic Adufa
5. Storage of the collected data in the cloud
Galvanized boom and pump brackets
It offers greater durability of the material.
Multifunction control
Multifunction controls to control the hydraulic movements of the slurry tanker.
Primary siphon 220 mm high
Higher siphon for more efficient filling of the slurry tanker.
Do you want to configure your equipment?
Order your user manual and spare parts list for your equipment